- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
| Quantity: | |
|---|---|
Model: model-15-of
Type/Application: Single Sided
Plate-Diameter (inches): 15 in
Plate-Diameter (mm): 381 mm
Product Description:
The Lapmaster Wolters Model 15 is a bench-mounted unit with a rigid, lightweight, cast
aluminum base. The machine is of the “ring lapper" configuration, enabling high standards
of flatness and surface finish to be routinely achieved.
The Model 15 is derived from the popular Model 12 and features a scaled-up lapping plate,
conditioning rings and convenient “wrap-around" worktable.
In - process lap plate flatness control is provided for by three conditioning rings, which
locate in yoke/roller bearing assemblies. Workpieces are located within carriers or appropriate
fixtures which run within the rings. Large parts of cylindrical shape can be substituted for the rings.
The Model 15 is ideally suited for lapping low and high production quantities.In-shop lapping
reduces costs of component processing and equipment maintenance programs. Worn parts are
reconditioned and salvaged, thus eliminating scrap. Valve bodies, discs, gears, vanes, valve plates
and shaft seals are a few of the components benefiting from the lapping process.
The Model 15 is equally at home in the laborator y, where it can be used to process a wide variety
of materials on an experimental basis. These results can then be applied to a production situation.
Rigid cast aluminium base (12" and 15" Models)
Heavy duty welded carbon steel base (20" Model)
Three conditioning rings with roller yoke and bearing assemblies
Conventional abrasive feed system
Automatic digital cycle timer
Electrical system wired for various voltages 50/60 Hz, 1 phase (Ph) and 3 phase (Ph) to customer
specification
High torque drive unit with up to 2 hp motor and gear reducer
Parts loading table (15" and 20" Models)
Model: model-15-of
Type/Application: Single Sided
Plate-Diameter (inches): 15 in
Plate-Diameter (mm): 381 mm
Product Description:
The Lapmaster Wolters Model 15 is a bench-mounted unit with a rigid, lightweight, cast
aluminum base. The machine is of the “ring lapper" configuration, enabling high standards
of flatness and surface finish to be routinely achieved.
The Model 15 is derived from the popular Model 12 and features a scaled-up lapping plate,
conditioning rings and convenient “wrap-around" worktable.
In - process lap plate flatness control is provided for by three conditioning rings, which
locate in yoke/roller bearing assemblies. Workpieces are located within carriers or appropriate
fixtures which run within the rings. Large parts of cylindrical shape can be substituted for the rings.
The Model 15 is ideally suited for lapping low and high production quantities.In-shop lapping
reduces costs of component processing and equipment maintenance programs. Worn parts are
reconditioned and salvaged, thus eliminating scrap. Valve bodies, discs, gears, vanes, valve plates
and shaft seals are a few of the components benefiting from the lapping process.
The Model 15 is equally at home in the laborator y, where it can be used to process a wide variety
of materials on an experimental basis. These results can then be applied to a production situation.
Rigid cast aluminium base (12" and 15" Models)
Heavy duty welded carbon steel base (20" Model)
Three conditioning rings with roller yoke and bearing assemblies
Conventional abrasive feed system
Automatic digital cycle timer
Electrical system wired for various voltages 50/60 Hz, 1 phase (Ph) and 3 phase (Ph) to customer
specification
High torque drive unit with up to 2 hp motor and gear reducer
Parts loading table (15" and 20" Models)
