The Model 36” lapping machine is ideally suited for lapping low and high production quantities.
The Model 36” is a unit with a rigid, steel base. The machine is of the ring lapper configuration, enabling high standards of flatness and surface finish to be routinely achieved.
Lap plate flatness control is provided by three conditioning rings, which is located in yoke / roller bearing assemblies. Work pieces are located within carriers or appropriate fixtures which run within the rings.
The lap plate flatness and work consequently is controlled by adjusting the conditioning rings’ position relative to the lap plate track.
STANDARD FEATURES
• Heavy duty cast steel base.
• Wrap-around work table facilitates parts handling.
• Three conditioning rings with roller yoke and bearing assemblies to facilitate in-process plate flatness control.
• Electrical system wired for 440 volts, 50 hertz, 3 phase.
• Automatic digital cycle timer: time ranges from 0.1 to 999 seconds, minutes or hours.
• Abrasive feed system designed for water or oil based lapping slurries, consisting of pump, tank and three outlet system with individual variable flow control. This permits uniform lapping rates at each work station.
• The High Torque Drive unit is consisted of 5.0 HP /4.0 KW motor and heavy duty reducer. Electronic self-start is included for smooth lap plate acceleration. Lap Plate speed is 50 rpm.
STANDARD SPECIFICATIONS
• High density, cast iron serrated lap plate 915mm O.D. x 90 mm I.D. x 60 mm thickness.
• Three high density cast iron serrated conditioning rings. 410 mm O.D, 360 mm I.D and 90 mm Height.
• Operation and maintenance manual.
• Allen wrench.
OPTIONAL FEATURES
• Custom machines and tooling.
• Various lapping/polishing plates.
Weight & Dimension
• Gross Weight: 1950kgs
• Dimension:L1120 x W1500 x 865mm
The Model 36” lapping machine is ideally suited for lapping low and high production quantities.
The Model 36” is a unit with a rigid, steel base. The machine is of the ring lapper configuration, enabling high standards of flatness and surface finish to be routinely achieved.
Lap plate flatness control is provided by three conditioning rings, which is located in yoke / roller bearing assemblies. Work pieces are located within carriers or appropriate fixtures which run within the rings.
The lap plate flatness and work consequently is controlled by adjusting the conditioning rings’ position relative to the lap plate track.
STANDARD FEATURES
• Heavy duty cast steel base.
• Wrap-around work table facilitates parts handling.
• Three conditioning rings with roller yoke and bearing assemblies to facilitate in-process plate flatness control.
• Electrical system wired for 440 volts, 50 hertz, 3 phase.
• Automatic digital cycle timer: time ranges from 0.1 to 999 seconds, minutes or hours.
• Abrasive feed system designed for water or oil based lapping slurries, consisting of pump, tank and three outlet system with individual variable flow control. This permits uniform lapping rates at each work station.
• The High Torque Drive unit is consisted of 5.0 HP /4.0 KW motor and heavy duty reducer. Electronic self-start is included for smooth lap plate acceleration. Lap Plate speed is 50 rpm.
STANDARD SPECIFICATIONS
• High density, cast iron serrated lap plate 915mm O.D. x 90 mm I.D. x 60 mm thickness.
• Three high density cast iron serrated conditioning rings. 410 mm O.D, 360 mm I.D and 90 mm Height.
• Operation and maintenance manual.
• Allen wrench.
OPTIONAL FEATURES
• Custom machines and tooling.
• Various lapping/polishing plates.
Weight & Dimension
• Gross Weight: 1950kgs
• Dimension:L1120 x W1500 x 865mm